Aluminium Plain & Stucco Sheet |
|
 |
Prism can supply high quality plain sheets for general engineering and for special applications. Prism can offer plain sheets from Hot Mill route as well as concast route. The sheet are supplied in Mill finish. Stucco Embossed Sheets can also be supplied.
|
| ALLUMINIUM SHEET RANGE |
| Alloy |
Temper |
Thickness (mm) |
Width (mm) |
Length (mm) |
| 1050/1060/1070 |
H1/H2/
H3/H4/O |
0.40 - 5.0 |
500- 1500 |
1000-5500 |
| 1100/1200/8011 |
H1/H2/
H3/H4/O |
0.40 - 5.0 |
500-1500 |
1000-5500 |
| 3003/3105/3005 |
H1/H2/
H3/H4 |
0.40 - 5.0 |
500-1500 |
1000-5500 |
5005/5052/
5086/5754 |
H1/H2
/H3/H4 |
0.40 - 5.0 |
500-1500 |
1000-5500 |
| Thickness Tolerance |
| Specified thickness (mm) |
Tolerance (± mm) |
| Over |
Thru |
Upto 1000mm Width |
Over 1000 mm Wdth |
| 0.40 |
0.63 |
0.05 |
0.08 |
| 0.63 |
0.80 |
0.06 |
0.09 |
| 0.80 |
1.00 |
0.07 |
0.10 |
| 1.00 |
1.20 |
0.08 |
0.11 |
| 1.20 |
1.60 |
0.08 |
0.12 |
| 1.60 |
2.00 |
0.09 |
0.14 |
| 2.00 |
2.50 |
0.10 |
0.16 |
| 2.50 |
3.20 |
0.12 |
0.18 |
| 3.20 |
4.00 |
0.14 |
0.22 |
PACKING |
Wooden Box / Wooden Pallet with edge protector &
interleaving with poly film. |
|
CHEMICAL COMPOSITION % |
| Alloy |
Si |
Fe |
Cu |
Min |
Mg |
Cr |
Zn |
Ti |
Al |
| 1050 |
0.25 max. |
0.40 max. |
0.05 max. |
0.05 max. |
0.05 max. |
- |
0.05 max. |
0.03 max. |
99.50 min. |
| 1060 |
0.25 max. |
0.35 max. |
0.05 max. |
0.03 max. |
0.03 max. |
- |
0.05 max. |
0.03 max. |
99.60 min. |
| 1070 |
0.20 max. |
0.25 max. |
0.04 max. |
0.03 max. |
0.03 max. |
- |
0.04 max. |
0.03 max. |
99.70 min |
| 1100 |
0.95 max. |
0.95 max. |
0.05-0.20 |
0.05 max. |
- |
- |
0.10 max. |
- |
99.00 min. |
| 1200 |
1.00 max. |
1.00 max. |
0.05 max. |
0.05 max. |
- |
- |
0.10 max. |
0.05 max. |
99.00 Min. |
| 3003 |
0.6 max. |
0.7 max. |
0.05-0.20 |
1.0-1.5 |
- |
- |
0.10 max. |
- |
Rem. |
| 3005 |
0.6 max. |
0.7 max. |
0.30 max. |
1.0-1.5 |
0.2-0.6 |
0.10 max. |
0.25 max. |
0.10 max. |
Rem. |
| 3105 |
0.6 max. |
0.7 max. |
0.30 max. |
0.30-0.8 |
0.20-0.8 |
0.20 max. |
0.40 max. |
0.10 max. |
Rem. |
| 5005 |
0.30 max. |
0.7 max. |
0.20 max. |
0.20 max. |
0.50-1.1 |
0.10 max. |
0.25 max. |
- |
Rem |
| 5052 |
0.25 max. |
0.40 max. |
0.10 max. |
0.10 max. |
2.2-2.8 |
0.15-0.35 |
0.10 max. |
- |
Rem |
| 5086 |
0.40 max. |
0.50 max. |
0.10 max. |
0.2-0.7 |
3.5-4.50 |
0.05-0.25 |
0.25 max. |
0.15 max. |
Rem |
| 8011 |
0.50-0.9 |
0.6-1.0 |
0.10 max. |
0.20 max. |
0.05 max. |
0.05 max. |
0.10 max. |
0.08 max. |
Rem |
| WIDTH TOLERANCE |
| ± 2.0 MM |
| LENGTH TOLERANCE |
| ± 3.0 MM |
|
NOTE : Kindly indicate details of end application to help us suggest quality of the material i.e through
hot mill route or concast route. |
Note : MOQ conditions shall apply. |
